Free shipping on all orders over $50
7-15 days international
28 people viewing this product right now!
30-day free returns
Secure checkout
89417236
WIZACE Double shielded coaxial extension cable made of low loss S-LMR400 sized coax cable Specifications: - Connector 1: N Male - Connector 2: RP SMA Male (Note: RP-SMA Male adapter cannot be applied to SMA Male) - Length: 100 feet(32 Meters) - Impedance: 50 Ohm - Cable type: Low Loss S-MR400 Cable - Diameter: S-MR400 Cable 10.3mm/0.4 inch. - Operating temperature : -20°C ~ +70°C. - Minimum bending radius is only 2.44 inches. - 90 degree bends in one inch or less without loss. S-MR-400: S-MR400 is an excellent cable for runs up to 50-70 feet in WiFi and Cellular use, and provides superior performance for HF/VHF/UHF installation up to 250 feet. S-MR400 Coax is the same size as RG-8U or RG-213 cable, 0.405 inches in diameter. A larger cable means a much larger center conductor and supports better signal retention for higher frequency use. 200% Higher VHF Performance than RG8X; 400% Higher than RG58. Application: Used in most of connections between 2.4G/3G/4G/5G/LTE cellular modems, wireless AP/Router, signal amplifiers, PCI Card, GPS systems, rotary antenna assemblies, WiFi hotspots, receivers, scanners, meters, wireless internet routers and radio transmitters to antennas. Cable assemblies used for mining cryptocurrency such as HNT, Litecoin, Bitcoin, etc. NOTICE : NOT for use with 75 Ohm video devicesIf you don't understand the application of RP-SMA Male connector, please don't buy it, this is not SMA Male Cable.Package included: 1 x N Male to RP-SMA Male Low Loss Coax Cable.
✔Connector All-copper N Male to RP-SMA Male adapter. (Note RP-SMA Male adapter cannot be applied to SMA Male)
✔100 feet(32 Meters) Low-Loss S-LMR400 size coax, Impedance 50 ohm, Diameter = 10.3mm/0.405 inch.
✔Ultra Low-Loss S-LMR400 offers a significantly larger center conductor and supports better signal retention for longer cable runs and higher frequency use. A larger cable means a MUCH larger center conductor and supports better signal retention for HF/VHF/UHF and higher frequency use. 200% Higher VHF Performance than RG8X; 400% Higher than RG58.
✔The braid of this S-LMR400 coax cable is high-density tinned copper and 100% shield. Double Shielded Coax extension cable assemblies are constructed with top quality extremely low-loss S-MR400 cable and gold plated connectors. High frequency low loss and low impedance, heat Shrink on Both Ends.
✔Used in most of connections between 2.4G/3G/4G/5G/LTE cellular modems, wireless AP/Router, signal amplifiers, PCI Card, GPS systems, rotary antenna assemblies, WiFi hotspots, receivers, scanners, meters, wireless internet routers and radio transmitters to antennas.
✔Compatible Helium HNT Hotspot Miner, BOBCAT Miner, Nebra HNT Indoor Hotspot Miner, Lora LoraWAN Gateway Hotspot Module, RAK Hotspot Miner, SyncroBit Gateway, Wireless Network Router, WiFi AP Hotspot Modem, WiFi USB Adapter, Desktop PC Wireless Mini PCI Express PCIE Network Card Adapter. Wireless Router/ Huawei, Cisco, etc AP UBNT Web Bridge / Signal Amplifier.
I bought 2 extension cords at the same time to come back for testing, and the results made me very satisfied. highly recommended! !Material: cut an extension cord to check the inner core, it is completely pure copper. Confirm that it is of LMR240 quality.Use: I have hooked it up to my Bobcat HNT miner, running between the miner and the antenna and so far so good! I have a good stable signal, orks perfectly on my Bobcat Miner.Price: Cable works just fine and the price for this one is competitive.Conclusion: This cable is very well constructed and appears to have very little attenuation, I'm very pleased and will order again for future projects. Quality is better than I expected, highly recommend.