7 Inch Ultra Thin Diamond Tile Saw Blade for Angle Grinder - Dry/Wet Cutting Ceramic, Concrete & Granite - Perfect for DIY Home Renovation and Professional Tile Installation Projects

GoYonder Diamond Saw Blade Why GoYonder GoYonder specializes in products and solution for professionals. We are focus on providing high-quality and practical home & kitchen products such as diamond saw blades, circular saws, cutting wheels and polishing pads for angle grinder. Instructions Before use, make sure that the saw blade is not damaged. If it is damaged, it is strictly forbidden to use. When assembling, the motor shaft is matched with the center of the saw blade, and the error must be less than 0.1mm.Note that the direction of the arrow marked on the saw blade is the same as the direction of rotation of the tool used. When cutting, please do not apply side pressure and curve cutting. The feed should be smooth and avoid the impact of the blade on the workpiece to avoid danger. When dry cutting, do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade; wet film cutting should be cooled with water to prevent leakage.Experts suggest that after the saw blade is installed, it should be idling for a few minutes to confirm that there is no sway or beating, and then try cutting a few knives on the grinding wheel or refractory brick, and then the normal work is best. If the blade is not sharp enough, use a silicon carbide grindstone to get the edge. Warm prompt： The cutting machine must have a safety shield, and the operator must wear protective clothing such as safety clothing, glasses, and masks. Wide Application discos para cortar ceramica FEATURES Tile Saw Blade Wet or Dry Universal For Dry or Wet Cutting.Using water when cutting with GoYonder Diamond saw blades, which helps the blades longevity.The water cools down the blade from heating and decreases the friction in the cutting zone by flushing out all the debris of the materials cut X Teeth Turbo Mesh Rim Design X teeth design provides fast smooth precise clean excellent cutting performance. less dust, less vibration.which can bring higher work efficiency and economic benefits. Super Thin Diamond Saw Blade 1.2mm super thin turbo mesh rim design not only provides faster cutting, but also ensures a longer service life. 4” Red Diamond Saw Blade 4.5” Red Diamond Saw Blade 4.5” Gold Diamond Saw Blade 7” Red Diamond Saw Blade 8” Red Diamond Saw Blade Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.5 out of 5 stars 2,281 4.5 out of 5 stars 2,281 4.5 out of 5 stars 2,281 4.5 out of 5 stars 2,281 4.5 out of 5 stars 2,281 Price $9.89$9.89 $10.98$10.98 $9.88$9.88 $20.99$20.99 $26.98$26.98 Size 105mm /4 inch 115mm /4.5 inch 115mm /4 inch 180mm /7 inch 200mm /8 inch Thickness(mm) 1.2mm 1.2mm 1.2mm 1.4mm 1.4mm

【Size & Material】 This tile blade is made of quality metal alloy with diamond grains, which is durable and high strength. Available in various sizes to choose, the size is 180 x 10 x 1.4 x 22.23mm, Thickness 1.4mm, Outer Diameter105mm /7 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.4mm thickness.

【Tile Saw Blade Wet & Dry】 This 7inch tile blade features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use.

【Turbo Rim Design 】 The wet saw blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts.

【High Performance】 Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.4mm thickness can keep staying original diameter makes it easier to make straight cuts and deeper cuts.

【Widely Applications】 Our Grinder blade can be available used as porcelain tile blade, ceramia tile blade, granite blade, diamond blade and other thin masonry blade. Warm Prompt For your personal protection, before you start working we recommend that you wear safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment.（Take good care of your eyes/ears/face/hands/body/etc）

****** - Verified Buyer

4.5

While using a wet saw to cut mosaic tiles for a bathroom floor, we discovered that the water from the saw loosened the glue that holds the mosaics to their mesh backing. Some would come off, and the mesh - rather than remaining somewhat rigid - became pliable to the point where the tiles that did stay attached did not keep their proper spacing. It was a nightmare. So, we bought a score and snap tile cutter (after watching a video of the device being used to effortlessly and beautifully cut porcelain mosaic tiles) and discovered that the tiles we're using are too hard for such a cutter.Enter this blade. Attached to a sliding miter saw with good dust collection, this blade made quick and accurate work of dozens upon dozens of straight cuts. The cuts were clean when we started and clean when we finished. We started each cut moving the blade from back to front, just scoring the surface of the porcelain. Then we cut a little deeper in the same direction, and finished with a third pass from front to rear. This sounds like a lot of extra motion, but it worked out to a little over a minute for each sheet of tiles. The result was sharp edges with virtually no chipping.This blade is also set up like the ultra thin cutting blades we use for woodworking. The outer half of the blade (at the rim) is quite thin, removes (wastes) less material than a standard blade, provides less resistance when cutting, and has a thicker body at the center of the blade that keeps everything stiff and pretty wobble free. At the end of the job, the cutting surfaces on either side of the rim appear minimally worn. I suspect it could handle two or more similar jobs. One important heads-up. I forgot to turn on the dust collection a couple of times. Turns out dry cutting porcelain tile makes a spray of fine particles and plumes of dust. If you don't use effective dust collection, you will have quite a mess to clean up and porcelain dust in your nose, mouth, and lungs. A doctor would probably advise against the latter.What a pleasant surprise to get such a good blade at such a reasonable cost. Good on the manufacturer.Jim

7 Inch Ultra Thin Diamond Tile Saw Blade for Angle Grinder - Dry/Wet Cutting Ceramic, Concrete & Granite - Perfect for DIY Home Renovation and Professional Tile Installation Projects

DESCRIPTION

FEATURES

REVIEWS

YOU MAY ALSO LIKE

Durable Rock Slab Grinding Disc & Ceramic Cutting Blade for Angle Grinder - 2-Pack Glass Cutting Disc Set for Stone, Tile & DIY Projects

4.5-Inch 13-Tooth Woodworking Chain Saw Blade for Angle Grinder - 7/8-Inch Center Hole, Fits 115mm Grinders - Perfect for Wood Carving, DIY Projects & Home Renovations

Hoteche 6-Amp 1/4-Inch Heavy Duty Electric Die Grinder - High-Speed Rotary Tool for Precision Metal Grinding, Cutting, Polishing - Ideal for Automotive, Metalworking & DIY Projects

Mini Belt Sander Electric - 895 Motor 7-Speed Adjustable DIY Bench Grinder for Wood, Metal & Plastic Polishing - Perfect for Woodworking, Metalworking & Craft Projects